Cảm biến khuếch đại sợi quang DFS
Thương hiệu:
Mã sản phẩm:
Giá bán: Liên hệ chúng tôi
Cảm biến khuếch đại sợi quang, với kết cấu nhỏ gọn, sử dụng các sơi quang M4,M6 có thễ dò được các chi tiết nhỏ, góc cạnh mà các cảm biến thường khó phát hiện
Cảm biến sợi quang kỹ thuật số được thiết kế cung cấp khả năng dò tin cậy sử dụng dây dẫn quang bằng nhựa ,hộp nhựa mãnh có vỏ bảo vệ vừa khít nhiều khoảng trống nhỏ .DFS được điều chỉnh bằng cách ấn nút duy nhất từ phía người thao tác ,ngoài ra không có việc nào khác. Cài đặt mặc định trên sensor sẽ hoạt động hầu hết các ứng dụng. DFS sẽ đơn giản hay phức tạp tùy theo bạn muốn thế nào.Nếu ứng dụng của bạn phức tạp hơn chút ,DFS cũng có thễ được điều chỉnh theo nhiều ứng dụng.
DFS11
Digital Fiber Optic Sensor
AN ALL INCLUSIVE FIBER OPTIC SENSOR
The Digital Fiber Optic Sensor is designed to provide reliable detection using plastic fiber optic light guides. The slim-line housing with protective lid will fit in a variety of small spaces. The DFS is adjusted by a single push of a button; there is no guess work on the part of the operator. The sensor default settings will work for most applications. The DFS is as simple or as complicated as you would like. If your application is a bit more complex, the DFS can be adjusted in many configurations.
Features and Options:
- Intuitive numerical/percentage diagnostic OLED display
- Attractive 10mm wide housing
- Low power & wide operating voltage
- Advanced remote programing
- Six AUTOSET modes including window
- Crosstalk rejection of up to eight sensors synchronized via single wire network or two sensors without a wire
- Programable output/input configurations
- High-Speed, high-resolution, and long-range modes
- Combinable dual timers, and counters
- NPN, PNP, or Push-Pull Outputs
- Gate/Interrogate Input for Product inspection
- CE approved
Benefits:
- Easy to Setup
- Highly Accurate
- Low Maintenance
- Made in USA
- Durable and Reliable
| AUTOSET MODE The sensor’s automatic threshold adjustment is controlled by one of six AUTOSET modes: Light State (LS), Dark State (DS), Midpoint (MP), Two-Point (2P), Dynamic (DY), and Window (WN).AUTOSET PERCENT For Light State (LS), Dark State (DS), and Window (WN), the offset percentage is adjustable. AUTOSET percent determines threshold placement during AUTOSET. Placement is a percentage of received light beam intensity.DETECT MODE Selects between Light On or Dark On Mode. When Autoset mode is set to Window (WN) the Detect Mode effects the output state when the light level is inside the two window thresholds.RESPONSE TIME Choose between five different settings ranging from fastest speed to highest resolution: Ultra-High-Speed (UHS), High-Speed (HS), Standard (STD), High-Resolution (HR), Long-Range (LR), Ultra-Long-Range (ULR). HYSTERESIS ANTI-CROSSTALK |
TIMER Choose from 19 pre-configured timer control functions. Each timer represents a function such as on-delay, off-delay, etc. Once a function is selected, adjustable parameters of that function appear such as delay time.OUTPUT TYPE The sensor has configurable Q1 (primary; black wire) and Q2 (secondary; white wire) I/O signals. Select the way the connector signals function and route: Single Output with Remote Input, Redundant, Complementary, and Classic.OUTPUT MODE When configured as an output Q1 and Q2 can be set one of three ways: PNP – Source, NPN – Sink, or Push/Pull..INPUT FUNCTIONS When Q2 is programmed as an input, several different functions can be performed: Remote set, Remote command, Interrogate, Gate, Remote Dark On, and Remote Lockout. INPUT MODE DISPLAY MODE LOCK MODE |

Factory Reset
Hold down MODE on power up, then tap up or down.
Sensor will return to all factory default settings.







