SUPPLY VOLTAGE & CURRENT:
• 8-30 Vdc
• Receiver current 10mA;
Red Transmitter current 5mA;
Infrared Transmitter current 15mA
• Reverse polarity protected
• Transient spike protected OUTPUT:
• 150mA output current
• Short circuit & transient spike protected
• Saturation voltage: < 0.3Vdc @ 10mA
< 2Vdc @150mA
• NPN or PNP based on model.
• Light-On or Dark-On based on model. POWER-UP DELAY:
• 300ms. No output pulse on power-up. RESPONSE TIME:
• A-Channel = 300µs on, 600µs off typical
• B-Channel = 342µs on, 684µs off typical REPEATABILITY:
• A-Channel = 100µs
• B-Channel = 118µs RANGE:
• RED = 2m Range - Light spot 100mm @ 2m
• INFRARED = 20m Range. LIGHT IMMUNITY:
• Responds to model’s modulation frequency (A-Ch, B-Ch).
• High immunity to most ambient light, including high efficiency lighting and high intensity strobes. Note: No false trigger between two sensor pairs on different channels. | LED INDICATORS:
• Transmitter: Green power LED
• Receiver: Green power LED, red output LED. Illuminates when output is ON. LED LIGHT SOURCE:
• LED, Red = 660nm CONNECTIONS:
• M8, 3-pin, 6in (152mm) pigtail
• Attached cable: RX: 3-wire 6ft (1.8m); TX: 2-wire 6ft (1.8m) OPERATING TEMPERATURE:
• -20°C to 70°C (-4°F to 158°F)
• Optional fog-proof lens available. Optional fog-proof lens helps reduce condensation at freezing environments. Consult factory for specific application details. HOUSING CONSTRUCTION:
• 12mm barrel
• Chemical resistant, high-impact polycarbonate
• Lens: polycarbonate
• Encapsulated
• 12mm mounting nut included RATINGS & CERTIFICATIONS:
• IP67
• CE
• UL pending |
