MLEL Label Sensors Mini Label Eye CẢM BIẾN NHÃN MINI
Thương hiệu:
Mã sản phẩm:
Giá bán: Liên hệ chúng tôi
Mô tả sản phẩm
GET THE OPTICAL ADVANTAGE!
MLE
The MINI LABEL EYE® is a special purpose gap or slot sensor optimized to sense adhesive labels adhering to a roll of backing paper.
GET THE OPTICAL ADVANTAGE!
The MLE’s specially designed optics greatly reduces sensitivity to web flutter. The high intensity IR LED penetrates thicker backing material and reduces temperature drift.
The astonishing 35 microseconds allows the MLE to keep up with even the fastest high speed rewinders.
This miniature sensor can fit into many small spaces at only 10mm wide. The fork design with intergrated bracket keeps mounting easy.
The oversize Status Indicator can be seen even from a distance away. Displays GREEN when the sensor is powered on, and displays RED when the output is ON.
MLE Mini Label Eye là loại cảm biến rãnh hay khe hở có công dụng đặc biệt nhằm tối ưu hóa để cảm nhận nhãn dính bám vào trục nền giấy .
Ưu điễm quang học : MLE được thiết kế chuyên biệt giảm rất nhiều độ nhạy với rung động màng phim.Tia hồng ngoại LED cường độ cao sẽ đi sâu vào vật liệu nền dày hơn và giảm nhiệt độ cọ sát .Tốc độ đang kinh ngạc 35 micro giây cho phép cảm biến MLE duy trì được ngay cả khi trục cuốn quay tốc độ cao nhanh nhất .Cảm biến nhỏ này có nhiều gắn vừa khít nhiều khe hở nhỏ chỉ rộng 10mm .Thiết kế khe hở tích hợp vòngkẹp nên dễ lắp đặt..Đèn báo trạng thái quá khổ có thễ nhìn thấy ngay cả khoảng cách xa. Đèn hiễn thị GREEN màu xanh khi sensor đang có điện và đèn màu đỏ RED khi ngõ ra OUTPUT có điện ON.
Technical Features
| Model Specific | |
| Adjustment Type:
• Push Button Connection Type: • Attached cable: 4-wire 6ft (1.8m) |
Housing Type:
• Fork Output: • NPN/PNP |
| Family Specific | |
| Supply Voltage: • 4.75 to 30Vdc • Polarity ProtectedCurrent Requirements: • 18mA (exclusive of load)Output Transistors: • NPN or PNP (dependent on model) • Outputs can sink or source up to 120mA (current limited) • All outputs are continuously short circuit protectedRemote Set Input • Active low (NPN) 1ma • Transient spike protectedResponse Time • 35 microsecondsHysteresis: • 5%Pushbutton Control: • One push AUTOSET • LT/DK inverts output • Adjust threshold (+ or -)LED Light Source: • High intensity IR LED |
Indicator: • Green or Red to indicate power is on. • AMBER during AUTOSET. • Red when sensor’s output transistors are ON, and GREEN when they are OFF. NOTE: Flashes RED when a short circuit condition exists.Light Immunity: • Responds to sensor’s pulse modulated light source, resulting in high immunity to most ambient light.Ambient Temperature: • -40°C to 70°C (-40°F to158°F)Connections • M8, 4-pin • Attached cable: 4-wire 6ft (1.8m)Housing Construction • Top lid: polycarbonate • Output window: ABS • Case: 50% glass filled nylon • Buttons: silicon rubberRatings and Certifications • IP65 • CE • UL pending |
Thông số kỹ thuật
Technical Features
| Model Specific | |
| Adjustment Type:
• Push Button Connection Type: • Attached cable: 4-wire 6ft (1.8m) |
Housing Type:
• Fork Output: • NPN/PNP |
| Family Specific | |
| Supply Voltage: • 4.75 to 30Vdc • Polarity ProtectedCurrent Requirements: • 18mA (exclusive of load)Output Transistors: • NPN or PNP (dependent on model) • Outputs can sink or source up to 120mA (current limited) • All outputs are continuously short circuit protectedRemote Set Input • Active low (NPN) 1ma • Transient spike protectedResponse Time • 35 microsecondsHysteresis: • 5%Pushbutton Control: • One push AUTOSET • LT/DK inverts output • Adjust threshold (+ or -)LED Light Source: • High intensity IR LED |
Indicator: • Green or Red to indicate power is on. • AMBER during AUTOSET. • Red when sensor’s output transistors are ON, and GREEN when they are OFF. NOTE: Flashes RED when a short circuit condition exists.Light Immunity: • Responds to sensor’s pulse modulated light source, resulting in high immunity to most ambient light.Ambient Temperature: • -40°C to 70°C (-40°F to158°F)Connections • M8, 4-pin • Attached cable: 4-wire 6ft (1.8m)Housing Construction • Top lid: polycarbonate • Output window: ABS • Case: 50% glass filled nylon • Buttons: silicon rubberRatings and Certifications • IP65 • CE • UL pending |







